Black Diamond Equipment
Zur Wunschliste hinzufügen
Bitte triff eine Auswahl
Produktmerkmale WEITERLESENDas Cyborg ist ein vielseitiges Steigeisen aus rostfreiem Stahl zum Eis- und Mixedklettern mit modularen Frontzacken, die von Mono- auf Doppelzacken umgestellt werden können.
Kostenlose Lieferung bei einem Einkauf ab 100 €
Standardversand innerhalb von 10 Werktagen
Erstklassiges Steigeisen zum Eis- und Mixedklettern. Neues Design aus rostfreiem Stahl für weniger Gewicht.
- Die unverwechselbare Konstruktion aus rostfreiem Stahl rostet nicht, ist widerstandsfähiger, weniger anfällig für Schneeablagerungen und besitzt ein geringeres Gewicht.
- Neuer, schlanker Fersenhebel.
- Die verstellbaren vertikalen Frontzacken und aggressiven Sekundärzacken wurden in ihrer Geometrie noch weiter verbessert.
- Pro-Version für technische Schuhe.
- Die Clip-Version wurde für Schuhe ohne vorderen Sohlenrand entworfen.
- Dual-Density-ABS im Lieferumfang enthalten.
VIDEO PROFILE: BD athlete Conrad Anker ice climbing in Hyalite Canyon, Montana
BD athletes Will Gadd and Tim Emmett ice climbing in the Alps
Cyborg Crampon wurde bewertet mit von 5 von 26.
Rated 4 von 5 von Todd aus Very nice crampon mono or dual point It takes about ten minutes for me to switch out the dual for mono points with warm hands after an initial struggle to make the anti-balling plate mods for both (loss of star). I really like the ability to use both styles without dropping another wad of cash for a single purpose crampon. They are solid and stable, bite into ice easily, take my futile attempts at mixed climbs in stride, and stand up to years of abuse. I've had my cyborgs for 6 years and am still waiting to need to replace the front points! The pro stays put on my very narrow Asolo boots- I have never had any sideways play, even though my boots leave about 3/8" on each side up front.
Rated 2 von 5 von Greg aus worn out in one season Beautifull design, clever use of stainless steel, binding works fine (perfect for La Sportiva Nepal Evo). Unfortunately I'm not going to be able to use the forged front teeth this winter for ice climbing... The stainless steel teeth are already completely worn out after just one season of alpine mountaineering. By comparison, my previous crampons lasted 4 or 5 seasons with about the same number of mixed routes every year. I couldn't resist measuring the hardness of the remains of my old crampons, so I took both of my old crampons to a friends who runs a small fabrication shop and could measure the surface harness. HV30 hardness is just shy of 400 for the BD Cyborg, and shy of 500 for the now 5 or 6-year old competitor crampon. So yes, the old crampons are very rusty, but it's obvious to me that the extra 20% surface hardness makes a big difference on wear. I didn't do much front pointing this summer, so the front point are still OK, but the rest of the crampon has unfortunately reached its end of life after a 3-month season. It's too bad that the soft-ish stainless steel lets down such a good looking and functionnal crampon. It also means that the Cyborg won't rank very high in term of eco footprint (4 or 5 times as many crampons are needed for the same job).
Rated 4 von 5 von Brett aus Toe bail adjustment difficult There are no instructions that I could find about how to move the toe bails, but they are difficult to get out. They have to be in a certain orientation to allow the compressed inner portion to go through the hole, then I had to push with a pair of pliers from the inside and pry with a screwdriver from the outside to get it free. I moved them all the way forward and they still won't go over my Koflach's toe welt. Had to order large toe bails, but that's a customer service matter about which I've contacted BD.
Rated 5 von 5 von Anonym aus Cutting edge Used these bad boys all last winter and this spring. I enjoy pushing my gear to the max and I have to say I have nothing to say because these crampons are great for any technical ice climbing. Cool feature, you can switch to a mono front point style if you want. Remember you may need a wide toe bail on some models of footwear
Rated 4 von 5 von Oldman aus Fully met my expectations to date I bought these for ice climbing after the season was over this year. Nonetheless, I've had the opportunity to use these on a moderately steep snow climb, and I found their performance, on ascent, fully met my expectations. However, on descent I had a significant snow balling problem. Spring snow in Colorado is a dynamic medium, but I was surprised given the integrated anti-balling plates. My companion's crampons did not suffer similarly. I will attempt to ameliorate the problem by applying a hydrophobic spray (like canola cooking oil) the next time I use them, and I will let you know (here) how it works out.
Rated 3 von 5 von jason aus Switching dual to mono is difficult I think this crampon climbs well and works great. The one beef I have is that (for me) it's super difficult to go from mono point to dual point configuration or vice versa. You also have to cut the plastic on the bail in order to do this. Not something you can do in the field. I really wanted this to be a crampon I could take on a trip, do some mixed climbing (mono point config), and then the next day do a big long water ice climb (dual point config), but I have found it too difficult to change configuration.
Rated 3 von 5 von Jeff aus Toe Bails wouldn't fit my boots Just bought a new pair of Cyborg Pro's. Tried to fit them to my size 46 LaSportiva Trango Prime boots, and both the medium (which came on the crampons) and small toe bails included wouldn't fit. I switched them out with my old Bionic Pro toe bails, and that seems to have done the trick. Was wondering if anybody else has had the same problem/solution as me. Looking forward to getting on some ice with them!
Rated 5 von 5 von Cermo aus reliable crampons perfect crampons for mixed and ice routes, they fit well, hold perfectly in ice and you can make confident steps in mixed climb. Switching to mono point is not that user friendly. maybe extra antiboot for mono point will be good idea, so you do not need to use saw for customizaiton.