- Products
- |
- Articles
-
QC Lab: Weakness of Nose-hooked Carabiners
I've seen and/or heard of only a handful of carabiners that have broken in the field, and most have broken in the same way: nose hooked. The nose of the carabiner gets hung up on something. Mehr erfahren >
-
QC Lab: Welches ist der beste Knoten zum Abseilen?
Rappel knot choice (Double Fisherman's, Ring Bend or Euro Death/Overhand) has always been up for a large amount of debate. Mehr erfahren >
-
QC Lab: Worn Anchors
Over time cold shuts, leaver biners and chain links wear from countless lowers. Will these grooved-out anchors hold? Will the sharp edges trash your rope? Mehr erfahren >
-
QC Lab—Re-slinging Camalots and C3s
One of the most common questions we get at Black Diamond is regarding reslinging our Camalots, Camalot C3s and Camalot X4s. Gear doesn't last forever and eventually your cams will need to be reslung. Mehr erfahren >
-
QC Lab: How Ice Screws Are Made
Check out this QC Lab with KP and the crew as they tour you through our factory floor and show you firsthand how we manufacture ice screws. Mehr erfahren >
-
QC Lab: How strong is the Spinner Leash?
In this post KP weighs in on the intended use and risks of using the Spinner Leash. Read below for more knowledge and insight from our Director of Global Quality. Mehr erfahren >
-
QC LAB: OFF-AXIS AND TRI/QUAD-AXIAL LOADING
Recently, Kelly Cordes emailed KP and the QC crew, posing a lengthy question about the dangers of off-axis loading while at the belay. Our lab answered the question and got inspired to do a few more tests along the way. Mehr erfahren >
-
QC LAB: Remounting previously drilled skis
Our QC Lab posts aim to answer some of climbing's most common gear-related questions. This month, KP and the crew tackle the issue of mounting a pair of skis that have been previously drilled. Mehr erfahren >
-
QC Lab: Retiring Old Ropes
Our QC Lab posts aim to answer some of climbing's most common gear-related questions. This month, KP and the crew look at retiring ropes. Mehr erfahren >
-
QC Lab: Sling Strength in 3 Anchor Configurations
A few weeks ago a crew of super badass climbers rolled through the QA lab and one question came up more than just a few times: "What is the strongest way to rig an anchor at a belay?" Mehr erfahren >
-
QC Lab: To Screamer or not to Screamer?
This post comes direct from QA Manager Corey LaForge, who returned from a recent ascent of the Eiger Norwand with some questions about Yates Screamers that he promptly put to the test here in our lab. Mehr erfahren >
-
QC LAB: Via Ferrata
This month, KP and the crew discuss a via ferrata accident (NOT involving Black Diamond gear) that happened in Europe this summer, along with the ins and outs and proper use of via ferrata equipment. Mehr erfahren >
-
QC LAB: ULTIMATIVE BRUCHLAST VON AUSRÜSTUNG – WAS IHR SCHON IMMER WISSEN WOLLTET
KP und seine QC Lab Crew haben die häufigsten Fragen zu Ausrüstung gesammelt und getan, was sie am besten können – sie kaputt machen! Hier präsentieren wir die neuesten, faszinierenden Ergebnisse aus dem QC Lab. Mehr erfahren >
-
QC LAB: Gear Doesn't Last Forever – CRAMPONS
Our QA engineers take a look at the realistic life span of a crampon. Mehr erfahren >
-
QC LAB: Gear Doesn't Last Forever - SLINGS and QUICKDRAWS
This month, KP and the crew present Part III of their Gear Doesn't Last Forever series (check out Part I and Part II), where they investigate the complex world of slings and quickdraws. Enjoy. Mehr erfahren >
-
QC LAB: Gear Doesn't Last Forever—Ice Tool Picks
This month is first part of a series the QA engineers are doing on gear lifespan. Gear, no matter how well designed and constructed, doesn't last forever. First off, they'll focus on ice tool picks. Mehr erfahren >