QC Lab: Ulimate Strength Testing of the Gear You've Always Wondered About
Kolin Powick et l’équipe du QC Lab répondent aux questions les plus courantes qu’on leur pose au sujet du matériel et font ce qu’ils savent le mieux faire : ils le cassent ! Plongeons dans le monde fascinant des derniers résultats du QC Lab.... Lire la suite >
QC Lab: How Ice Screws Are Made
Check out this QC Lab with KP and the crew as they tour you through our factory floor and show you firsthand how we manufacture ice screws. Lire la suite >
Tech Tip: Taper Trimming Your Skins
Dialing in your new backcountry kit for the season? Straight from our design crew, this latest tech tip about taper trimming your skins will help make the uphill a little more enjoyable. Lire la suite >
QC LAB: Gear Doesn't Last Forever â€“ CRAMPONS
Our QA engineers take a look at the realistic life span of a crampon. Lire la suite >
QC LAB: Gear Doesn't Last Forever - SLINGS and QUICKDRAWS
This month, KP and the crew present Part III of their Gear Doesn't Last Forever series (check out Part I and Part II), where they investigate the complex world of slings and quickdraws. Enjoy. Lire la suite >
QC LAB: Gear Doesn't Last Forever—Ice Tool Picks
This month is first part of a series the QA engineers are doing on gear lifespan. Gear, no matter how well designed and constructed, doesn't last forever. First off, they'll focus on ice tool picks. Lire la suite >
QC Lab: Girth Hitching a Stopper
In this post, KP weighs in on a weird one, but curious nonetheless. What happens when you girth hitch a stopper to a bolt hanger? Lire la suite >
QC Lab: How Sketchy Is a Sharp-Edged Carabiner?
I've yanked a lot of worn, sharp-edged biners off of routes, and I've tested a lot of them. It's not the ultimate strength that makes me the most nervous; it's the risk of cutting a rope. Lire la suite >
QC Lab: How strong are Himalayan fixed lines?
Our QC Lab posts aim to answer some of climbing's most common gear-related questions. This month features fixed ropes from the Himalayas. Lire la suite >
QC Lab: Weakness of Nose-hooked Carabiners
I've seen and/or heard of only a handful of carabiners that have broken in the field, and most have broken in the same way: nose hooked. The nose of the carabiner gets hung up on something. Lire la suite >
QC lab : Quel est le noeud de rappel le plus solide ?
Rappel knot choice (Double Fisherman's, Ring Bend or Euro Death/Overhand) has always been up for a large amount of debate. Lire la suite >
QC Lab: Worn Anchors
Over time cold shuts, leaver biners and chain links wear from countless lowers. Will these grooved-out anchors hold? Will the sharp edges trash your rope? Lire la suite >
QC Lab—Re-slinging Camalots and C3s
One of the most common questions we get at Black Diamond is regarding reslinging our Camalots, Camalot C3s and Camalot X4s. Gear doesn't last forever and eventually your cams will need to be reslung. Lire la suite >
QC Lab: The Electric Harness Acid Test
This month, the Quality crew investigates a mysterious harness failure and dives into the effects of chemical contamination on climbing textiles. Lire la suite >
QC Lab: Autoblock Misuse
Lately I've been getting quite a few questions on the use of the Black Diamond ATC-Guide and/or similar "autoblock"-style belay devices—and another installment of QC with KP was born. Lire la suite >
QC LAB: Can a hot belay device melt my rappel slings?
Our QC Lab posts aim to answer some of climbing's most common gear-related questions. This month—how hot do belay devices really get? Lire la suite >